Instructions to set up your Adesso Lamp with Alexa:

  1. Make sure your Pendant/Wall Light is wired into the junction box or the portable Lamps are plugged into an AC Outlet.
  2. Turn on the power switch that controls the junction box.
  3. Download the latest version of the Alexa app from the app store

 

Implement the following steps for products with Smart Switch:

  1. To start User Guided Setup: hold “MODE” button for 10 seconds, the light will blink to confirm
  2. To initiate Factory Reset: hold “Power” button for 10 seconds, the light will blink to confirm – use this Reset button only if barcode is lost. 

 

Implement the following steps for products without Smart Switch:

  1. To start User Guided Setup: hold push button for 10 seconds, the light will blink to confirm
  2. To initiate Factory Reset: hold push button for 15 seconds, the light will blink to confirm – use this Reset button only if barcode is lost. 

 

Open Alexa app, tap the More icon to add a device, select Light category and Adesso brand

Follow the on-screen instructions. If prompted by the app, scan the 2D barcode on the page or the additional 2D code.

 

To locate the barcode:

You can find it on this assembly guide to the right, on the bottom of the lamp base, or the interior of the canopy.

 

To scan the barcode:

Scan the 2D bar code on this assembly guide to the right, on the bottom of the lamp base , or the interior of the canopy.

 

Use your Adesso Lamp with Alexa

To start use of your lamp with Alexa, just say, ” Alexa, turn on light.”

 

Product-specific troubleshooting details for your Adesso Smart Home Device:

 

Barcode troubleshooting:

Point your phone’s camera at the barcode in the operations guide to the right, on the bottom of the lamp base, or in the interior of the canopy.

To initiate User guided setup, when user lost the barcode or couldn’t find it:

  1. Power on your device
    2. Press and hold “MODE” or push button for 10 seconds. The lamp will flash on and off
  2. Press NEXT to continue setup

 

Additional manual steps without barcode:

 

For Adesso Smart Switch-based products:
Factory reset: The lamp can be removed from the network and restored to factory settings by following these steps:

  1. Press and hold “Power” button for 10 seconds
  2. The lamp will flash on and off
  3. The lamp is now restored to its factory settings

 

For non-Smart Switch-based products:
Factory reset: The lamp can be removed from the network and restored to factory settings by following these steps:

  1. Press and hold push-button button for 15 seconds
  2. The lamp will flash on and off
  3. The lamp is now restored to its factory settings

Works with Alexa

Contact Adesso for Support: alexa@adessohome.com